engine parts
1994-95 Mustang Throttle Body Adapter
$180.95
Made to order
Universal fit — no vehicle-specific fitment required.
Qty
1
Free freight ≥ $999 · $40 flat below
About this part
The Edelbrock 38353 adapter kit is required to install our Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs. The 1994-1995 throttle body has a different bolt flange and idle air motor than 1987-1993 models. It is also swung out 50 Deg and dropped 1 degree from its previous location. The 38353 locates the throttle body in the stock location and accepts the stock vacuum fitting. Testing on our 1994 Mustang showed a .4 second improvement in 10-70 MPH with our 3821 and 70mm throttle body vs. stock.
Specifications
| SHIPPING WIDTH | 6.25 |
|---|---|
| SHIPPING HEIGHT | 6.25 |
| SHIPPING LENGTH | 7.25 |
| SHIPPING WEIGHT | 3.45 |
| WARRANTY | 12 Months |
| EMISSIONS | CARB Eligible |
| PCDB CATEGORY | Air and Fuel Delivery |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Fuel Injection Throttle Body Adapter |
| INSTALLATION INSTRUCTIONS | 38353.pdf |
| MATERIAL | Aluminum |
| 9040 | D-215-75 |
| BORE DIAMETER | 70 MM |
| FINISH | Black Powder Coated |
| QUANTITY | Sold Individually |
| RECOMMENDED USE | For Edelbrock Manifolds #3821 #7123 and #7126 |
| RGL | WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
| TYPE | Elbow |
Datasheet — not yet published