engine heads and blocks
Crate Engine #46756 GM LT1 Gen V 416, Supercharged, 851 HP, 779 ft-lbs
$35,628
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock LT1 Supercharged LT1 crate engine part #46756 produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas. The foundation of this engine is a brand new GM LT1 Gen V aluminum block with a forged and balanced Manley crankshaft forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 10.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Sitting on top is an Edelbrock supercharger system with DP-3C intercooler and Eaton TVS R2650 rotors. Also included are the essential supercharger kit components such as the electric intercooler water pump intercooler plumbing intercooler recovery tank fuel rails fuel injectors mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and Camaro ZL1/ CTS-V LT4 belt offset. Pair with universal heat exchangers for a complete installation.; Crankshaft: Manley Forged 4340; Pistons: Manley Forged Aluminum - 20cc; Rods: Manley Forged H-Beam; Camshafts: 243 Deg /254 Deg .660/.651 114 LSA; Rocker Arms: GM LT1 Gen V; Induction: R2650 Supercharger; Cylinder Heads: Edelbrock Performer RPM #77119; Warranty: 2-year / Unlimited mileage; Engine Specifications: Finish: Black powder coated; Displacement: 416 c.i.d.; Bore: 4.065in; Stroke: 4.000in; Horsepower: 851 hp; Torque: 780 ft-lbs.; Compression: 10.5:1; Block: GM LT1 Gen V Alum.
Specifications
| WIDTH | 36 |
|---|---|
| HEIGHT | 44.5 |
| LENGTH | 36.5 |
| PROP65 | |
| WEIGHT | 577 |
| WARRANTY | 24 Months |
| EMISSIONS | Racing or Pre-Emissions Use Only |
| ATTRIBUTES | Throttle Body Included:Yes;Grade Type:Performance;Main Bearing Cap Bolt Quantity:4;Spark Plugs Included:No;Flywheel Included:No;Compression Ratio:10.6:1;Oil Pan Included:Yes;Timing Cover Included:Yes;Harmonic Balancer Included:Yes;Cylinder Head Material:Aluminum;Air Cleaner Type:Conical;Alternator Included:No;Calibration:Yes;Camshaft Type:243deg/254deg .660/.651 114 LSA;Carburetor Choke Type:N/A;Carburetor Type:Not Included;Construction Type:Assembled;Crankshaft Material:Forged Steel;Cylinder Head Type:Performer RPM;Displacement:416 CID;Distributor Included:No;ECU Included:No;Engine Block Material:Cast Iron;Hardware Included:Yes;Horsepower:851 HJ;Ignition Coil Included:Yes;Induction Type:Supercharged;Intake Manifold Type:EFI;Manifold Material:N/A;Oil Filter Included:Yes;Outside Pulley Diameter:3.25 IN;Piston Type:Forged Aluminum;Plug Wire and Boot Included:Yes;Pulley Belt Width:8-Rib;Quantity:Sold Individually;Rear Main Seal Type:1-Piece;RGL:WARNING: This product can expose you to Chromium Lead and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Rocker Arm Ratio:GM OEM;Rocker Arm Type:LT1;Rotor Type:Eaton TVS 2650 Black Powder Coated;Torque:779;Type:GM LT1 Gen V;Universal Or Specific Fit:Specific Fit;Valve Cover Included:Yes;Valve Cover Material:Cast Aluminum;Valve Cover Type:OEM Black Powder Coated;Water Pump Included:Yes Standard;Wire Harness Included:Yes |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Complete Assembly |
| VEHICLE SPECIFIC FITMENT | N |
| INSTALLATION INSTRUCTIONS | crate_engine-warranty.pdf |
Datasheet — not yet published