engine heads and blocks
Crate Engine #468900 Ford Coyote 302, Supercharged, 785 HP, 660 ft-lbs
$30,371
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock Supercharged 5.0L Ford Coyote crate engine part #468900 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford aluminum block built for high performance applications. The lightweight aluminum block features a forged and balanced crankshaft forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. The 9.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Sitting on top is an Edelbrock supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components such as the 8 rib belt drive electric intercooler water pump intercooler plumbing and intercooler recovery tank as well as fuel rails 60 lb./hr. fuel injectors coils mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump alternator idlers tensioners belts and hardware. Pair with universal heat exchangers for a complete installation. Engine Specifications: Finish: Black powder coated; Camshafts: Stock Ford; Rocker Arms: Stock Ford 2-1 Ratio; Induction: Supercharger System; Cylinder Heads: Stock Four-Valve Aluminum w/ Boss 302 valve springs; Warranty: 2-year / Unlimited mileage; Displacement: 5.0L (302 c.i.d.); Horsepower: 785 hp; Torque: 660 ft-lbs.; Compression: 9.5:1; Block: Ford Aluminum; Crankshaft: Forged; Pistons: Mahle Forged Aluminum; Rods: Manley Forged H-Beam
Specifications
| WIDTH | 36 |
|---|---|
| HEIGHT | 44.5 |
| LENGTH | 36.5 |
| PROP65 | |
| WEIGHT | 726 |
| WARRANTY | 24 Months |
| EMISSIONS | Racing or Pre-Emissions Use Only |
| ATTRIBUTES | Throttle Body Included:Yes;Grade Type:Performance;Main Bearing Cap Bolt Quantity:4;Spark Plugs Included:Yes;Flywheel Included:No;Compression Ratio:9.5:1;Oil Pan Included:Yes;Timing Cover Included:Yes;Harmonic Balancer Included:Yes;Cylinder Head Material:Aluminum;Air Cleaner Type:Not Included;Alternator Included:Yes;Calibration:No;Camshaft Type:Stock Ford;Carburetor Choke Type:N/A;Carburetor Type:Not Included;Construction Type:Assembled;Crankshaft Material:Forged Steel;Cylinder Head Type:Ford Racing;Displacement:302 CID;Distributor Included:No;ECU Included:No;Engine Block Material:Cast Iron;Hardware Included:Yes;Horsepower:785 HJ;Idler Pulley Included:Yes;Ignition Coil Included:Yes;Induction Type:Supercharged;Intake Manifold Type:EFI;Manifold Material:N/A;Oil Filter Included:Yes;Outside Pulley Diameter:3.00 IN;Piston Type:Forged Aluminum;Plug Wire and Boot Included:Yes;Pulley Belt Width:8-Rib;Quantity:Sold Individually;Rear Main Seal Type:1-Piece;RGL:WARNING: This product can expose you to Chromium Lead and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Rocker Arm Ratio:2:1;Rocker Arm Type:Ford OEM;Rotor Type:Eaton TVS 2650 Black Powder Coated;Torque:660;Type:Ford Coyote;Universal Or Specific Fit:Specific Fit;Valve Cover Included:No;Valve Cover Material:N/A;Valve Cover Type:N/A;Water Pump Included:Yes Standard;Wire Harness Included:Yes |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Complete Assembly |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | crate_engine-warranty.pdf |
| VERIFIED FITMENT |
|
Datasheet — not yet published