engine parts
Edelbrock 1146 Generator Bracket/Water Neck Kit (Offset) for 1949-53 Ford Flathead in Black
$179.95
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock part #1146 is a Generator Bracket kit for our 1109 '49-53 Ford Flathead Triple Deuce Intake Manifold. It is for those using the manifold in conjunction with a stock style generator. The purpose of kit is to remedy the interference between the generator and forward-most carburetor. The kit includes an offset generator bracket and water outlet (thermostat housing). The offset bracket attaches to the standard generator mount flange on the manifold but moves the generator out to the right where it is clear of the forward-most carburetor. The included water outlet allows the hose to be routed out past the generator before turning towards the radiator. (This is not required for the triple deuce manifold on motors with early center outlet heads.)
Specifications
| SHIPPING WIDTH | 8 |
|---|---|
| SHIPPING HEIGHT | 3.5 |
| SHIPPING LENGTH | 8.25 |
| SHIPPING WEIGHT | 2.2 |
| WARRANTY | 12 Months |
| EMISSIONS | EPA Eligible |
| PCDB CATEGORY | Electrical Charging and Starting |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Generator Bracket |
| INSTALLATION INSTRUCTIONS | 1146.pdf |
| MATERIAL | Aluminum |
| THICKNESS | 0.861 IN |
| ADJUSTMENT RANGE | 1.5 IN |
| FINISH | Satin |
| BUILT IN ADJUSTER BOLT | No |
| MOUNTING HOLE QUANTITY | 3 |
| RGL | WARNING: This product can expose you to Chromium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
Datasheet — not yet published