air fuel and ignition
Edelbrock 14055 Performer Carburetor #14055 600 CFM With Manual Choke, Satin Finish Front
$381
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
The Edelbrock #14055 Performer series 600 CFM carburetor is custom tuned to deliver the best performance possible with the Enforcer supercharger. Front and rear carbs sold separately. The Edelbrock #14055 is similar to a 1405 but is tuned specifically for use with the SBC TVS2300 Dual Quad Superchargers. The Edelbrock #14055 is for the front carburetor only. The front carburetor must be used in conjunction with the rear carburetor Edelbrock #14056. Several characteristics make the 14055 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires which means that there are no power valves to blow out and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly the carburetor has the unique ability to "hold a tune" so once it is tuned the carburetor stay's tuned. What this means to you is that compared to other carburetors the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable user-friendly and is easily tunable for miles and miles of trouble-free operation.
Specifications
| WIDTH | 7.375 |
|---|---|
| HEIGHT | 6.75 |
| LENGTH | 13.75 |
| PROP65 | |
| WEIGHT | 9.1 |
| WARRANTY | 3 Months |
| EMISSIONS | EPA Eligible |
| ATTRIBUTES | Street Legal:No;Base Length:6.25 IN;Base Width:5.937 IN;Flange Shape:Square Bore;Mounting Hardware Included:No;Grade Type:Performance;Gasket Or Seal Included:Yes;Mounting Hole Quantity:8;Linkage Attached:No;Choke Type:Manual;Float Material:Brass;Spacer Included:No;Maximum Flow Rating:600 2L;Marine Approved:No;Body Height:3.25 IN;Body Material:Aluminum;Adjustable Float Level:No;Air Cleaner Flange Diameter:5.125 IN;Primary Jet Diameter:0.100 IN;Secondary Jet Diameter:0.107 IN;Main Venturi Diameter:1.190 IN;Small Venturi Diameter:1.560 IN;Float Level:0.437 IN;Float Drop:1.0 IN;Metering Rod Power Tip Diameter:0.037 IN;Metering Rod Length:3.15 IN;Mounting Hole Diameter:0.355 IN;Barrel Quantity:4;Center Hung Floats:No;Finish:Satin;Inlet Fitting Thread Diameter:0.625 IN;RGL:WARNING: This product can expose you to Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
| PCDB CATEGORY | Air and Fuel Delivery |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Carburetor |
| VEHICLE SPECIFIC FITMENT | N |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Edelbrock/carb-tuning-guide.pdf |
Datasheet — not yet published