fuel components
Edelbrock 1718 Victor Series Mechanical Fuel Pump for 429/460 Ford (130 GPH)
$239.95
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock part #1718 Victor Series fuel pump is for 429/460 Ford. The Edelbrock Victor Series fuel pump is a must for drag racing circle track racing street machines or any application that demands a high-volume fuel delivery these fuel pumps feature a high quality three stage polished finish. High-volume 3/8" NPT inlet and outlet orifices surpass the capacity of conventional models. Produces 10 psi and must be used with an external fuel pressure regulator such as our Fuel Pressure Regulator #8190 or #1727. For gasoline only. Clockable lower housing can be rotated in 60 Deg Increments for best inlet/outlet alignment.
Specifications
| SHIPPING WIDTH | 4.7 |
|---|---|
| SHIPPING HEIGHT | 5 |
| SHIPPING LENGTH | 9.8 |
| SHIPPING WEIGHT | 2.03 |
| WARRANTY | 12 Months |
| EMISSIONS | EPA Eligible |
| PCDB CATEGORY | Air and Fuel Delivery |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Mechanical Fuel Pump |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Edelbrock/1718.pdf |
| FUEL TYPE | Gas |
| MAXIMUM PRESSURE | 10.0 PS |
| CONNECTION TYPE | Female |
| MOUNTING HARDWARE INCLUDED | Yes |
| GASKET OR SEAL INCLUDED | Yes |
| HOUSING MATERIAL | Aluminum |
| OUTLET TYPE | Female |
| INLET QUANTITY | 1 |
| OUTLET QUANTITY | 1 |
| INLET FITTING THREAD SIZE | 3/8" NPT |
| INLET THREAD DIAMETER | 0.675 IN |
| OUTLET FITTING THREAD SIZE | 3/8" NPT |
| OUTLET THREAD DIAMETER | 0.675 IN |
| PUMP TYPE | Mechanical |
| RGL | WARNING: This product can expose you to Chromium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
Datasheet — not yet published