engine valvetrain
Edelbrock 2103 Performer-Plus Camshaft Kit for 1957-86 Big-Block Chevrolet
$383
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock Performer-Plus Camshaft #2103 is designed for 400 Chevy V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2103 is a smooth idling cam for daily drivers trucks vans RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters) assembly lube and instructions. This cam produced 395 Ft Lbs of Torque when paired with Performer Intake manifold #2101 and stock cylinder heads. 50-State Legal E.O. #D-215-19 for 1957-86 small-block Chevrolet. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 214 Degrees - Intake lift: .442" - Exhaust lift: .442" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"
Specifications
| WIDTH | 8 |
|---|---|
| HEIGHT | 3.7 |
| LENGTH | 26.5 |
| PROP65 | |
| WEIGHT | 13.8 |
| WARRANTY | 12 Months |
| EMISSIONS | CARB Eligible |
| ATTRIBUTES | Exhaust Valve Lift:0.442 IN;Intake Valve Lift:0.442 IN;Grade Type:Performance;Lifter Materials:Hardened Steel;Exhaust Duration at .050 inch Lift:214 DD;Intake Duration .050 Inch Lift:214 DD;9040:D-215-19;Advertised Exhaust Duration:288 DD;Advertised Intake Duration:288 DD;Computer Controlled Compatible:No;Lobe Separation:112 DD;Cam Type:Cast;Lifter Type:Hydraulic;RGL:WARNING: This product can expose you to Chromium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Camshaft and Lifter Kit |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | 2103.pdf |
Datasheet — not yet published