engine valvetrain
Edelbrock 2213 Rollin' Thunder Camshaft #2213 For SB Chrysler 273-360, Hydraulic Roller
$636
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
The Edelbrock Rollin? Thunder Camshaft #2213 for 273-360 CID Chrysler small-block engines is a high-performance hydraulic roller cam for street or strip applications. With an RPM range of 2 500 to 6 200 RPM this cam has been dyno-tested to deliver substantial gains at the 4 000 RPM mark. The #2213 Rollin? Thunder Camshaft produces a rough idle with an intake lift of .544 inch exhaust lift of .541 inch 286/294 degrees duration 236/242 degrees duration at .050-inch lift and a lobe separation angle of 110 degrees. We recommend our Performer RPM #60775 Cylinder Heads #7177 RPM Air-Gap Intake Manifold and #1906 AVS2 Carburetor with this combination. Engine assembly lube included.
Specifications
| WIDTH | 2.75 |
|---|---|
| HEIGHT | 2.75 |
| LENGTH | 24.5 |
| PROP65 | |
| WEIGHT | 11.6 |
| WARRANTY | 12 Months |
| EMISSIONS | EPA Eligible |
| ATTRIBUTES | Lifter Type:Hydraulic Roller;Exhaust Valve Lift:0.541 IN;Intake Valve Lift:0.544 IN;Exhaust Duration at .050 inch Lift:242 DD;Intake Duration at .050 Inch Lift:236 DD;Advertised Exhaust Duration:294 DD;Advertised Intake Duration:286 DD;Cam Type:Hydraulic Roller;Computer Controlled Compatible:No;Exhaust Valve Lift with Factory Rocker Arm Ratio:0.541 IN;Intake Valve Lift with Factory Rocker Arm Ratio:0.544 IN;Lobe Separation:110 DD;Basic Operating RPM Range:2500-6200 R3;Exhaust Cam Lift at Lobe:0.361 IN;Exhaust Timing at .050 inch Lift:Opens: 44.0 BBDC; Closes: 7.0 ATDC;Intake Cam Lift at Lobe:0.363 IN;Intake Center Line:106;Intake Timing at .050 inch Lift:Opens: 12.0 BTDC; Closes: 55.0 ABDC;Quantity:Sold Individually;RGL:WARNING: This product can expose you to Chromium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Camshaft |
| VEHICLE SPECIFIC FITMENT | N |
| INSTALLATION INSTRUCTIONS |
Datasheet — not yet published