air fuel and ignition
Edelbrock 35717 Pro Flo 4 EFI ECU and Electronics Kit for Ford 289/302 Engines
$1,409
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
This Pro-Flo 4 ECU and Electronics Kit for Ford 289/302 engines offers an economical plug-and-play solution for enthusiasts who want to keep their existing EFI Induction system (intake manifold fuel rails and accessories) but want the performance advantages of the Pro-Flo 4 EFI system. 
 
 Pro Flo 4 EFI ECU and Electronics kits include supporting sensors a distributor an ECU a wide-band O2 sensor a wiring harness and components for Ford 289/302 applications. This EFI system has both fuel and spark control features. The ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock’s E-Tuner Software for IOS and Android tablets and cell phones. The software includes base calibrations for most applications and necessary adjustments for AFR target ignition curve idle speed acceleration tuning coolant fans rev limiter etc.
 
 The customer must provide an induction system including a manifold throttle body fuel rails and injectors. Also a fuel pump regulator or fuel lines are not included. Users must refer to the Calibration Matrix in the instructions for the required injector size depending on engine cubic inches and HP requirements. Required injector sizes 29 lb./hr. 35 lb./hr. 42 lb./hr. and 60 lb./hr. Compatibility with forced induction applications requires 80 lb./hr. injectors.
Specifications
| WIDTH | 14.8 |
|---|---|
| HEIGHT | 8.8 |
| LENGTH | 20.1 |
| PROP65 | Y |
| WEIGHT | 11.6 |
| WARRANTY | 24 Months |
| EMISSIONS | Racing or Pre-Emissions Use Only |
| ATTRIBUTES | Fuel Pressure Regulator Included:No;Datalogging Support:Yes;Self-Tuning:Yes;Distributor Included:Yes;Fuel Pump Included:No;Fuel Injectors Included:No;Intake Manifold Included:No;Cross sell / Upsell Part Numbers:35930 29215;Data Logger:Yes;Display Included:No;Drive-By-Wire Capable:No;ECU Included:Yes;EGR:No;Fuel Rails Included::No;Handheld Controller Included:No;High or Low Impedence:High;IAC Motor Included:No;IAT Sensor Included:Yes;Injection Style:Sequential Port;Injector Connector Type:Minitimer / EV1;MAP Sensor Included:Yes;Maximum Horsepower W/ Gas:900;Metering Style:Speed Density;Notes:System tuning supported by E Tuner 4 App;Number of Connectors Supported:8;Oxygen Sensor Included:Yes;Power Adder Compatible:Yes;Prop 65 - Long Label:WARNING: This product can expose you to Tetrabromobisphenol A Nickel Carbon Black Nickel Monoxide 2-Methylimidazole Cobalt Antimony trioxide and Cadmium which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Prop 65 Y/N:Y;Quantity:Sold as a kit;Related Products:All Edelbrock and FAST EFI Ford 289/302 Manifolds 22746 Ignition Coil FAST and Edelbrock Throttle Bodies IAC Adapter FAST #307022 Edelbrock #3855 Edelbrock Pico and Siemens Fuel Injectors 29LbHr 35LbHr 42LbHr. 60LbHr 80LbHr Air Cleaners EFI Fuel systems 36031 Edelbrock Fuel Sump 8041 Throttle and Trans Kick Down Bracket;Required Products:Fuel Injection Intake assembly including Fuel Rails and Injectors;Throttle Body Included:No;Timing Control Compatible:Yes;TPS Sensor Included:No;Transmission Controller Included:No;User Tunable:Yes;Wiring harness included:Yes |
| PCDB CATEGORY | Air and Fuel Delivery |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Fuel Injection System |
| VEHICLE SPECIFIC FITMENT | N |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Edelbrock/63-35715 Install Instructions PF4.pdf |
Datasheet — not yet published