air intakes
Edelbrock 3815 High-Flow
$259.95
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
The Edelbrock High-Flow EFI Intake Elbow #3815 is intended for very high-power naturally aspirated EFI applications and turbocharged or centrifugal-supercharged engines making over 1 100 horsepower. This casting is CNC-machined to a 120mm opening and has a 4.250-inch-square throttle body bolt pattern with a base flange bolt pattern of 5.375-inch-square for use with 4500-series intake manifolds. The elbow has a 10-degree downward angle for a total of 100 degrees and can be mounted in a forward backward or sideways configuration. An internal divider prevents flow from concentrating at the back of the manifold which is a condition that commonly occurs with other elbows. Overall height of the High-Flow Elbow #3815 is 8.86 inches and it comes with a universal throttle bracket. For smaller 90mm throttle bodies order High-Flow Elbow #3814.
Specifications
| SHIPPING WIDTH | 9 |
|---|---|
| SHIPPING HEIGHT | 8.25 |
| SHIPPING LENGTH | 14.25 |
| SHIPPING WEIGHT | 8.7 |
| WARRANTY | 12 Months |
| EMISSIONS | Racing or Pre-Emissions Use Only |
| PCDB CATEGORY | Air and Fuel Delivery |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Air Intake Deceleration Elbow |
| MATERIAL | Aluminum |
| LENGTH | 8.0 IN |
| ADAPTER INCLUDED | No |
| BORE CENTERLINE HEIGHT | 6.0 IN |
| FINISH | Satin |
| FLANGE ANGLE | 100 DD |
| GASKET OR SEAL INCLUDED | Yes |
| OVERALL HEIGHT | 8.86 IN |
| QUANTITY | Sold Individually |
| RGL | WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov. |
| SIZE | 120 MM |
| TYPE | High Flow |
Datasheet — not yet published