engine heads and blocks
Edelbrock 5001 Torker II Intake Manifold Small-Block Chevy
$288
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock part #5001 Torker II intake manifold is designed for 1955-86 high-performance's street 262-400 c.i.d. small-block Chevys. This Torker manifold is a singe plane low rise intake that's great for high performance applications that have limited hood clearance. The manifold has an exhaust crossover for easy cold weather warm-ups but no provisions for exhaust heated chokes or EGR. Customers will need either electric or manual choke carburetors. Accepts late-model water neck air-conditioning alternator and H.E.I. Intake manifold will fit Corvette and '87 and later stock heads. Will not fit '87 and later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles (trucks vans etc.); use Performer EPS #2701.
Specifications
| WIDTH | 10.5 |
|---|---|
| HEIGHT | 5.7 |
| LENGTH | 22.5 |
| PROP65 | |
| WEIGHT | 14.7 |
| WARRANTY | 12 Months |
| EMISSIONS | EPA Eligible |
| ATTRIBUTES | Material:Aluminum;Grade Type:Performance;Gasket Or Seal Included:No;Single Or Dual Plane Type:Single Plane;Front Maximum Height:3.530 IN;Center Maximum Height:4.080 IN;Rear Maximum Height:4.630 IN;EGR Port:No;CNC Ported:No;Basic Operating RPM Range:2500-6500 R3;Color:Satin;Flange Type:4150;RGL:WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Series:Torker/Torker II;Vehicle Model:Chevrolet |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Intake Manifold |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | 5001.pdf |
| VERIFIED FITMENT |
|
Datasheet — not yet published