engine heads and blocks
Edelbrock 61175 Victor Jr Gen II HEMI Chrysler Cylinder Head Hydraulic Roller Camshaft
$1,926
Made to order
Universal fit — no vehicle-specific fitment required.
Qty
1
Free freight ≥ $999 · $40 flat below
About this part
Our new Edelbrock #61175 Victor Jr. cylinder head is designed for high output 650+ hp Chrysler 426-572 HEMI engines. They feature fully CNC'd combustion chambers and CNC blended seats for optimal air flow performance. This cylinder head also feature a revised exhaust valve angle to accommodate larger intake valves. They also feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion.
Specifications
| WIDTH | 11.125 |
|---|---|
| HEIGHT | 8.75 |
| LENGTH | 26.25 |
| PROP65 | |
| WEIGHT | 35.05 |
| WARRANTY | 12 Months |
| EMISSIONS | Racing or Pre-Emissions Use Only |
| ATTRIBUTES | Material:Aluminum;Valve Spring Retainers Included:Yes;Valve Locks Included:Yes;Exhaust Runner Volume:105 CCM;Valve Lock Material:Chromoly Steel;Rocker Arms Included:No;Cylinder Head Gasket Included:No;Valve Cover Gasket Included:No;Rocker Arm Studs/Bolts Included:No;Mounting Hardware Included:No;Assembled:Yes;Grade Type:Performance;Deck Height:10.72 IN;Deck Thickness:0.625 IN;Combustion Chamber Volume:170 CCM;Intake Runner Volume:245 CCM;Intake Valve Diameter:2.320 IN;Exhaust Valve Diameter:1.94 IN;Valve Spring Diameter:1.54 IN;Valve Spring Maximum Lift:0.700 IN;Guide Plates Included:No;Head Casting Number:31-6117;Valve Springs Included:Yes;Valve Seals Included:Yes;Valves Included:Yes;Camshaft Type:Hydraulic Roller;CNC Ported:Yes;Construction Type:Complete;EGR Port:No;Exhaust Port Location:Standard;Guide Material:Manganese Bronze;Horsepower:550-800 HJ;Product Family:Victor;Product Series:Victor Jr.;Push Rod Diameter:(Suggested) 0.3125 in Or 0.375 IN;Quantity:Sold Individually;Retainer Included:Yes;RGL:WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Seat Angle:Exhaust 45 deg/Intake 45 DD;Seat Material:Ductile Iron;Valve Angle:Exhaust (Tipped) 1.5-21.5 deg/Intake Stock;Valve Stem Diameter:0.3125 IN |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Cylinder Head |
| VEHICLE SPECIFIC FITMENT | N |
| INSTALLATION INSTRUCTIONS | 61175.pdf |
Datasheet — not yet published