engine heads and blocks
Edelbrock 7111 Performer Small Block Oldsmobile 350 Intake Manifold
$493
Made to order
Add your car with the “Your car” button in the header to check fitment.
Qty
1
Free freight ≥ $999 · $40 flat below
About this part
Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.
Specifications
| WIDTH | 14.75 |
|---|---|
| HEIGHT | 7.5 |
| LENGTH | 23.625 |
| PROP65 | |
| WEIGHT | 26.15 |
| WARRANTY | 12 Months |
| EMISSIONS | EPA Eligible |
| ATTRIBUTES | Material:Aluminum;Grade Type:Performance;Gasket Or Seal Included:No;Single Or Dual Plane Type:Dual Plane;Front Maximum Height:4.800 IN;Center Maximum Height:5.300 IN;Rear Maximum Height:5.800 IN;EGR Port:No;CNC Ported:No;Basic Operating RPM Range:1500-6500 R3;Finish:Satin;Flange Type:4150;RGL:WARNING: This product can expose you to Lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit www.P65warnings.ca.gov.;Series:Performer RPM;Vehicle Model:Oldsmobile |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Engine Intake Manifold |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | 7111.pdf |
Datasheet — not yet published