exterior and body
Borne Off-Road BNSD-BR-21RSBK Rear Shock Skid Plates, Black, fits Ford Bronco 2021+
$168
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
The lowest point of your Bronco's undercarriage is the rear shock mounts which means that the first thing that will hit and drag on rocks while you're on the trail is the rear shock mounts and/or the shocks themselves. This can cause damage to the mount or the shock itself and especially on the Bilstein shocks with the external reservoir. Being a critical component that supports the weight of the vehicle it is imperative to keep this portion of your undercarriage protected. That's why we came up with the Borne Off-Road Rear Shock Skid Plates for the 2021+ Ford Bronco. When it comes to skid plates strength and coverage are obviously the most important features so we designed them to provide coverage of your shock mount shock and shock reservoir if equipped. To provide strength and rigidity we constructed these from welded 3/16" plate steel with three points of mounting to ensure that they are tough enough to take blows on the trail and not allow rocks and debris to cause damage. We know these will take hits so we not only covered them in a sleek and durable powdercoated finish we first electrogalvanized plated them before powder so even if you do chip or scratch them on obstacles they will continue to be rust resistant. With vented bottoms they will drain any water mud or debris that gets in them. These are a direct bolt-on and will require no modification to your vehicle to install. As with all our products the Borne Off-Road Rear Shock Skid Plates for the 2021+ Ford Bronco include our signature Borne Off-Road Lifetime Warranty.
Specifications
| WIDTH | 8.9 |
|---|---|
| HEIGHT | 5.1 |
| LENGTH | 10.3 |
| PROP65 | Y |
| WEIGHT | 9.35 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Material:Steel;Color:Black;Configuration:One-Piece;Drilling Required:No;Finish:Powder Coated;Attachment Type:Bolt-On;Mounting Hardware Included:Yes;Universal Or Specific Fit:Specific;Material Thickness:0.1875 IN;Install Difficulty:4;OptionLabel:Black;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for 2021+ Ford Bronco;SellingPoint02:Fits with standard and Bilstein shocks;SellingPoint03:Constructed from 3/16-IN thick steel;SellingPoint04:Electrogalvanized and powdercoated for a rugged and durable rust-resistant finish;SellingPoint05:Bolt-on installation utilizing factory mounting points;SellingPoint06:Provides armored protection for vulnerable low-hanging shock mounts;SellingPoint07:Protects shock reservoir;SellingPoint08:Fits both 2 and 4 door models;SellingPoint09:Includes left and right shock skid plates;SellingPoint10:Slotted to allow drainage;SellingPoint11:Borne Off-Road Lifetime Warranty;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Engine Code:2.3L EcoBoost 2.7L EcoBoost;TechSpec Fits:2021+ Ford Bronco;TechSpec Includes:Borne Off-Road Rear Shock Skid Plates (L + R Pair)--(4) Bolts--(4) Flat Washers--(2) Double Captive Nuts--Borne Off-Road Lifetime Warranty";TechSpec Installation Torque Specs:350 lb-ft;TechSpec Length (Inches):8.15;TechSpec Material:Black Powdercoated Steel;TechSpec Overall Height (Inches):4.49;TechSpec Overall Width (Inches):4.57;TechSpec Thickness (Inches):0.188;TechSpec Weight (lbs):8.14 |
| PCDB CATEGORY | Body |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Skid Plate |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published