engine heads and blocks
Mishimoto MMBCC-FRD-11P Baffled Oil Catch Can, PCV Side, fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+
$170
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Carbon buildup is an enemy of any motor and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV or Positive Crankcase Ventilation" system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment it's not as great for your engine. In doing so these vapors carry remnants of oil and unburned fuel which make their way into your intake system causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system including the intake manifold and intake valves. Over time this will gum up and turn into carbon buildup. Direct-injection engines like the EcoBoost are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze and even fit with the factory engine cover. As with all our products this catch can is backed by our signature Mishimoto Lifetime Warranty.
Specifications
| WIDTH | 5.19 |
|---|---|
| HEIGHT | 5.19 |
| LENGTH | 5.19 |
| PROP65 | Y |
| WEIGHT | 2.39 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Can Material:6061-T6 Billet Aluminum;Can Type:Twist Off;Can Outside Diameter:2.5 IN;Inlet Port Quantity per Can:1;Outlet Port Quantity per Can:1;Can Finish:Anodized;Hose Included:Yes;Color:Black;Outlet Port Inside Diameter:0.7 IN;Inlet Port Inside Diameter:0.7 IN;Drain Plug Included:Yes;Finish:Anodized;Height:3.7 IN;Maximum Can Capacity:3 FO;Interior Baffle:Yes;Mounting Bracket Included:Yes;Color:N/A;Install Difficulty:2;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost and 5.0L;SellingPoint02:Anodized billet 6061 aluminum construction;SellingPoint03:Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location;SellingPoint04:Helps reduce carbon buildup on intake valves;SellingPoint05:Protects intake system and essential engine components by capturing oil blow-by in the PCV system;SellingPoint06:Application-specific pre-molded hoses fit with stock engine cover;SellingPoint07:Includes factory-style quick-disconnect fittings for easy and secure installation;SellingPoint08:Helps maintain proper octane levels to reduce potential detonation;SellingPoint09:Internal air diverter increases air turbulence to improve oil separation;SellingPoint10:Simple and quick installation with basic hand tools;SellingPoint11:Filter and can are fully serviceable;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:Patent No. US D1 077 006 S;SellingPoint15:Mishimoto Lifetime Warranty;TechSpec Applications:N/A;TechSpec Catch Can Diameter (in):N/A;TechSpec Chassis Codes:N/A;TechSpec Drain Plug Thread Size:N/A;TechSpec Engine Codes:N/A;TechSpec Height (in):N/A;TechSpec Includes:N/A;TechSpec Inlet:N/A;TechSpec Installation Notes:N/A;TechSpec Material:N/A;TechSpec Note:This kit cannot be used in conjunction with MMBCC-F150-11PBE if you have the 5.0L engine MMBCC-F150-11PBE is a more direct fit for 2011-2014 F150 models;TechSpec Outlet:N/A |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Oil Catch Can Kit |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published