engine heads and blocks
Mishimoto MMBCC-Q50-16PBE Baffled Oil Catch Can, PCV Side, fits Infiniti Q50/Q60 3.0T 2016-2024
$260
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Infiniti is no stranger to the luxury sedan segment taking on the likes of BMW Mercedes and Audi. The introduction of their VR30DDTT made the 2016-2024 Q50 and Q60 into a rocket ship and blasted the manufacturer into the stratosphere alongside the typical posh sedans. Luxury is all about the ability to perform which is where even the most advanced internal combustion engines still suffer. Luckily we're here to keep the blow-by off those intake valves with the 2016-2024 Infiniti Q50/Q60 3.0T Direct-Fit Catch Can Kit. The powerhouse 3.0T equipped in these Infinitis is the prime breeding ground for blow-by and carbon buildup. With the already high compression ratio combined with a turbo for each bank and a direct injection fueling system oil and fuel particles have free range to gum up the intake manifold and valves ultimately diminishing the performance and luxury of your Q50 or Q60. Nestled in the tight engine bay our 2-port compact catch can design is installed in line with the VR30DDTT's PCV system to intercept and trap oil and fuel particles from the crankcase before they have a chance to take up residence on the top end components. Our robust mounting bracket places the catch can in an easily accessible location and includes a slotted mounting screw design to take the hassle out of servicing the can. To back up Mishimoto's superior craftsmanship each 2016-2024 Q50/Q60 catch can kit comes with the renowned Mishimoto Lifetime Warranty!
Specifications
| WIDTH | 7.65 |
|---|---|
| HEIGHT | 7.65 |
| LENGTH | 7.65 |
| PROP65 | Y |
| WEIGHT | 3.29 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Can Material:6061-T6 Billet Aluminum;Can Type:Twist Off;Can Outside Diameter:2.5 IN;Inlet Port Quantity per Can:1;Outlet Port Quantity per Can:1;Can Finish:Anodized;Hose Included:Yes;Color:Black;Outlet Port Inside Diameter:0.6 IN;Inlet Port Inside Diameter:0.6 IN;Drain Plug Included:Yes;Finish:Anodized;Height:3.7 IN;Maximum Can Capacity:3 FO;Interior Baffle:Yes;Mounting Bracket Included:Yes;Install Difficulty:2;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 2016-2024 Infiniti Q50/Q60 3.0T;SellingPoint02:Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter;SellingPoint03:Helps reduce carbon buildup on intake valves;SellingPoint04:Patented (US D884 760 S) billet 6061 aluminum can sealed with Viton O-rings;SellingPoint05:Installs in under 30 minutes;SellingPoint06:Robust application-specific bracket mounts the can in a serviceable location;SellingPoint07:Includes pre-molded hoses for simplified installation;SellingPoint08:Slotted mounting holes for easier accessibility and servicing;SellingPoint09:Defends intake system and essential components from oil blow-by;SellingPoint10:CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can;SellingPoint11:Catch can has a 3 oz. capacity for longer servicing intervals;SellingPoint12:Internal air diverter increases air turbulence to improve oil separation;SellingPoint13:Helps maintain proper octane levels to reduce potential detonation;SellingPoint14:Filter and can are fully serviceable;SellingPoint15:Mishimoto Lifetime Warranty;TechSpec Applications:2016-2024 Infiniti Q50 3.0T--2016-2022 Infiniti Q60 3.0T;TechSpec Catch Can Diameter (in):N/A;TechSpec Chassis Codes:N/A;TechSpec Drain Plug Thread Size:N/A;TechSpec Engine Codes:VR30DDTT;TechSpec Height (in):N/A;TechSpec Includes:N/A;TechSpec Inlet:N/A;TechSpec Installation Notes:N/A;TechSpec Material:N/A;TechSpec Note:This kit will not fit with some aftermarket strut tower bars--After installation Mishimoto recommends checking the contents of the baffled catch cans every 1 000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.;TechSpec Outlet:N/A |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Oil Catch Can Kit |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Mishimoto Automotive/MMBCC-Q50-16_INSTALLATIONGUIDE.pdf |
| VERIFIED FITMENT |
|
Datasheet — not yet published