engine parts
Mishimoto MMBCC-UNI-RD Baffled Oil Catch Can, Red
$249.95
Made to order
Universal fit — no vehicle-specific fitment required.
Free freight ≥ $999 · $40 flat below
About this part
Mishimoto is proud to announce the release of our universal Baffled Oil Catch Can. With over a year of research and development time Mishimoto has created the most effective oil catch can on the market.
 ----
 The Mishimoto Baffled Oil Catch can was designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. Custom grooves in the catch can's inlet turbulates the air longer and ensures all the oil sinks to the bottom of the can leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions.
 ----
 The 100-percent billet 6061 aluminum can accepts -AN fittings at the inlet outlet and drain area allowing over 25 possible configurations. For maximum fitment options the top cog mounting setup allows the can to be mounted from multiple angles. To make maintenance easy the drain plug can be removed to allow for -AN return to the oil pain. The can is also 100-percent washable unlike many other cans that require you to replace your filtration system.
 ----
 Our Baffled Oil Catch Can is available in a variety of colors and backed by the Mishimoto Lifetime Warranty.
Specifications
| SHIPPING WIDTH | 11.9 |
|---|---|
| SHIPPING HEIGHT | 11.9 |
| SHIPPING LENGTH | 11.9 |
| PROP65 | Y |
| SHIPPING WEIGHT | 6.75 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| PCDB CATEGORY | Engine |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Oil Separator |
| GRADE TYPE | Performance |
| PORT QUANTITY | 2 |
| PORT OUTSIDE DIAMETER | 20 MM |
| COLOR | Red |
| INSTALL DIFFICULTY | 2 |
| PROP 65 SHORT LABEL | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| PROP 65 Y/N | Y |
| SELLING POINT01 | 40-micron bronze filter blocks oil from depositing in ventilation system |
| SELLING POINT02 | Special engineered inlet pattern turbulates air longer allowing oil to condense |
| SELLING POINT03 | Internal baffle ensures no oil escapes during high-speed cornering |
| SELLING POINT04 | Replaceable single-unit filter is easy to maintain |
| SELLING POINT05 | Inlet and outlet accept -AN fittings for various configurations |
| SELLING POINT06 | 100-percent billet anodized 6061 aluminum with laser etched finish |
| SELLING POINT07 | Safe to use in pressurized systems |
| SELLING POINT08 | Drain plug can be removed to allow for -AN return to oil pan |
| SELLING POINT09 | Unique upper mounting bracket cogs provide versatile mounting options |
| SELLING POINT10 | Includes push-on fittings for easy installation |
| SELLING POINT11 | N/A |
| SELLING POINT12 | N/A |
| SELLING POINT13 | N/A |
| SELLING POINT14 | N/A |
| SELLING POINT15 | N/A |
| TECH SPEC APPLICATIONS | N/A |
| TECH SPEC CATCH CAN DIAMETER (IN) | 3 |
| TECH SPEC CHASSIS CODES | N/A |
| TECH SPEC DRAIN PLUG THREAD SIZE | M20x1.5 |
| TECH SPEC ENGINE CODES | N/A |
| TECH SPEC HEIGHT (IN) | 6 |
| TECH SPEC INCLUDES | (1) Black Anodized 6061 Aluminum Catch Can--(2) Aluminum Mounting Brackets--(1) Bronze Filter--(1) Internal Baffle--(3) Dowty Oil Seals--(2) M20x1.5 x 5/8" Push-on Barbed Fittings--(1) Drain Plug--(6) Black Rubber Oil Line--(4) Worm Gear Clamps--(1) Black Rubber Band--Mounting Hardware and Brackets--Mishimoto Lifetime Warranty |
| TECH SPEC INLET | M20x1.5 |
| TECH SPEC INSTALLATION NOTES | N/A |
| TECH SPEC MATERIAL | 6061 Aluminum |
| TECH SPEC NOTE | Drain plug is attached to the internal baffle and if it is replaced the internal baffle may not be usable again.----After installation Mishimoto recommends checking the contents of the baffled catch can every 1 000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.----5/8 inlet hose--Push fitting inlet/outlet has a thread pitch of M20x1.5. To convert to -10AN see https://www.mishimoto.com/sandwich-plate-fitting-m20-x-10an.html |
| TECH SPEC OUTLET | M20x1.5 |
Datasheet — not yet published