cooling
Mishimoto MMCFK-JK-12BK Coolant Filter Kit, Black, fits Jeep Wrangler JK 2012-2018
$166.95
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
The cooling system in your 2012-2018 Jeep Wrangler is one of the most crucial systems in the entire vehicle. If just one component in the cooling system fails or becomes clogged it can be catastrophic. A clogged heater core is inconvenient on a chilly night's drive but a clogged radiator can leave you out in the cold with a blown engine. Unfortunately for many JK Wrangler owners repeated clogging and replacement of cooling system components is an all too familiar scenario. Normal engine wear and servicing can introduce damaging solids into the cooling system wreaking havoc as they go. 2012-2018 JKs are particularly susceptible however thanks to excess casting sand left in the cylinder heads from the factory. But Mishimoto is here to help clean up your JK?s cooling system. Our 2012-2018 Jeep Wrangler JK Coolant Filter Kit will help keep anything that?s not liquid coolant from circulating around your engine and cooling components. This direct-fit kit installs in under an hour and the included Wix? filter traps particles as small as 27 microns. Our silicone hoses are a direct fit and the included ball valves make for a durable and long-lasting system. The 4mm-thick steel bracket can stand up to anything the street or trail can throw at it. Like all Mishimoto products the Mishimoto 2012-2018 Jeep Wrangler JK Coolant Filtration Kit is backed by our Lifetime Warranty.
Specifications
| SHIPPING WIDTH | 9.96 |
|---|---|
| SHIPPING HEIGHT | 9.96 |
| SHIPPING LENGTH | 9.96 |
| PROP65 | Y |
| SHIPPING WEIGHT | 6.69 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Cooling System Filter |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Mishimoto Automotive/MMCFK-JK-12_INSTALLATIONGUIDE.pdf |
| CONFIGURATION | Multi-Piece |
| FILTER MEDIA MATERIAL | Cellulose |
| OUTSIDE DIAMETER | 3.7 IN |
| UNIVERSAL OR SPECIFIC FIT | Specific |
| HOUSING MATERIAL | Aluminum |
| INSTALL DIFFICULTY | 2 |
| PROP 65 SHORT LABEL | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| PROP 65 Y/N | Y |
| SELLING POINT01 | Direct-fit for 2012-2018 Jeep Wrangler JK 3.6L |
| SELLING POINT02 | Filters solids from your Jeep's cooling system |
| SELLING POINT03 | Helps prevent clogging and extends the life of your Jeep's radiator heater core and other cooling system components |
| SELLING POINT04 | Installs in under 1 hour |
| SELLING POINT05 | Adjustable filter head and cut-to-length hoses can accommodate supercharger piping or other modifications |
| SELLING POINT06 | Includes Wix coolant filter to remove particles as small as 27 microns |
| SELLING POINT07 | 4mm-thick steel bracket will stand up to anything the road or trail can throw at it |
| SELLING POINT08 | Includes durable ball valves for long-lasting and leak-free service |
| SELLING POINT09 | Direct-fit hoses make installation quick and easy |
| SELLING POINT10 | Mishimoto Lifetime Warranty |
| SELLING POINT11 | N/A |
| SELLING POINT12 | N/A |
| SELLING POINT13 | N/A |
| SELLING POINT14 | N/A |
| SELLING POINT15 | N/A |
| TECH SPEC APPLICATIONS | 2012-2018 Jeep Wrangler JK 3.6L Pentastar |
| TECH SPEC CAUTION | N/A |
| TECH SPEC CHASSIS CODES | N/A |
| TECH SPEC CORE CONSTRUCTION | N/A |
| TECH SPEC CORE HEIGHT (IN) | N/A |
| TECH SPEC CORE LENGTH (IN) | N/A |
| TECH SPEC CORE THICKNESS (IN) | N/A |
| TECH SPEC ENGINE CODES | N/A |
| TECH SPEC FLUID CAPACITY (QTS) | N/A |
| TECH SPEC INCLUDES | Application-Specific Mounting Bracket--Silver Anodized 6061 Aluminum Filter Mount--Coolant Filter--Direct-Fit Silicone Hoses--Brass Ball Valves--Worm Gear Clamps--Mounting Hardware--Mishimoto Lifetime Warranty |
| TECH SPEC INLET | N/A |
| TECH SPEC INSTALLATION NOTES | 22 in-lbs recommended for all worm gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs |
| TECH SPEC NOTE | This coolant filter kit will not repair or reverse damage caused by sediment or other solids in the cooling system. Mishimoto recommends following all manufacturer cooling system service procedures and maintenance intervals.----Mishimoto recommends changing the coolant filter after the first month again after 3 months and then every year after that depending on driving conditions. Because each engine was cast differently there will be a different amount of debris in each engine. Utilizes WIX filter #24070 |
| TECH SPEC OUTLET | N/A |
| TECH SPEC OVERALL HEIGHT (IN) | N/A |
| TECH SPEC OVERALL LENGTH (IN) | N/A |
| TECH SPEC OVERALL WIDTH (IN) | N/A |
| TECH SPEC ROWS | N/A |
| VERIFIED FITMENT |
|
Datasheet — not yet published