exhaust and emissions
Mishimoto MMEXH-RAM-94SK Exhaust Manifold Stud Kit, fits Dodge Ram 5.9L/6.7L Cummins 1994-2018
$117.95
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Upgrade your engine's performance and reliability with the Mishimoto manifold stud kit for your Cummins. These bolts are designed to increase the clamping force between the manifold and cylinder head effectively minimizing the risk of boost-killing leaks and reducing the likelihood of manifold warpage. Anyone who has attempted to grapple a heavy manifold and turbocharger with one hand while attempting to line up a bolt hole with the other will appreciate the ease and convenience this stud kit provides. With 12-point hardware engineered to prevent nut rounding gone are fears of stripped or rounded hardware. Plus backed by a Lifetime Warranty these manifold bolts offer peace of mind and assurance for the long haul.
Specifications
| SHIPPING WIDTH | 4.6 |
|---|---|
| SHIPPING HEIGHT | 1.5 |
| SHIPPING LENGTH | 7.6 |
| PROP65 | Y |
| SHIPPING WEIGHT | 1.22 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| PCDB CATEGORY | Exhaust |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Exhaust Manifold Stud Kit |
| GRADE TYPE | Performance |
| INSTALL DIFFICULTY | 3 |
| PROP 65 SHORT LABEL | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| PROP 65 Y/N | Y |
| SELLING POINT01 | Increase clamping force between manifold and cylinder head reducing chances for a boost-killing leak |
| SELLING POINT02 | Reduces risk of manifold warpage |
| SELLING POINT03 | Chromium-infused steel provides strength and corrosion resistance |
| SELLING POINT04 | 12-point hardware reduces the risk of rounding off the nuts |
| SELLING POINT05 | Helps make installing and lining up the gaskets and manifold to the head much easier than the factory bolts |
| SELLING POINT06 | Lifetime Warranty |
| SELLING POINT07 | N/A |
| SELLING POINT08 | N/A |
| SELLING POINT09 | N/A |
| SELLING POINT10 | N/A |
| SELLING POINT11 | N/A |
| SELLING POINT12 | N/A |
| SELLING POINT13 | N/A |
| SELLING POINT14 | N/A |
| SELLING POINT15 | N/A |
| TECH SPEC APPLICATIONS | Dodge Ram 2500 5.9L L6 1994-2010--Dodge Ram 3500 5.9L L6 1994-2007--Dodge Ram 2500 6.7L L6 2007-2010--Dodge Ram 3500 6.7L L6 2007-2010--Dodge Ram 4500 6.7L L6 2008-2010--Dodge Ram 5500 6.7L L6 2008-2010--Ram 2500 6.7L L6 2010-2018--Ram 3500 6.7L L6 2011-2018--Ram 4500 6.7L L6 2011-2018--Ram 5500 6.7L L6 2011-2018 |
| TECH SPEC CHASSIS CODES | N/A |
| TECH SPEC ENGINE CODES | N/A |
| TECH SPEC INCLUDES | (12) Studs--(12) Nuts--(12) Washers--Mishimoto Lifetime Warranty |
| TECH SPEC MATERIAL | Alloy Steel |
| TECH SPEC NOTE | Cummins 5.9L 12V (1994 - 1998) - Compatible with aftermarket exhaust manifolds only--Cummins 5.9L 24V (2003 - 2007) - Requires removal of factory heat shield--Cummins 6.7L 24V (2007.5 - 2018)--Depending on your application some factory coolant line brackets may not work with this stud kit.--Follow the factory torque sequence starting in the middle of the manifold and working outwards in a circular pattern. Torque to 55 ft. lbs. Re-torque after a heat cycle.--Cummins Exhaust Manifold Gasket Part #3946275 |
| TECH SPEC OVERALL HEIGHT (INCHES) | N/A |
| TECH SPEC OVERALL LENGTH (INCHES) | 2.14in Stud Length |
| TECH SPEC OVERALL WIDTH (INCHES) | N/A |
| TECH SPEC PIPE DIAMETER | N/A |
| TECH SPEC WEIGHT (POUNDS) | 1.19 |
| VERIFIED FITMENT |
|
Datasheet — not yet published