cooling
Mishimoto MMICP-DMAX-17KP Intercooler Pipe Kit, Polished, fits Chevrolet/GMC 6.6L Duramax 2017-2019
$599
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with our Mishimoto intercooler pipe and boot kit. The factory L5P intercooler pipes are a measly 2.5in diameter that chokes the engine while tight bends and a resonator on the hot side create even more restriction.The Mishimoto intercooler pipes are 3in in diameter throughout with smooth transitions to significantly increase airflow resulting in more power potential. Our hot-side pipe also eliminates the stock resonator for maximum flow. Combined the Mishimoto intercooler pipes are up to 55-percent less restrictive than stock.Both the hot-side and cold-side utilize a two-piece design for ease of install. To connect the pipes to our Duramax this kit also includes our silicone boots with DuraCore(TM) technology. Mishimoto DuraCore(TM) technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone DuraCore(TM) provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new O-ring and spring clip to ensure a secure and leak-free fit. Unlike other available pipes on the market our pipes retain the intake air temp harness mounting location for safe and secure wire routing just as Chevy/GMC intended. Our intercooler pipes also incorporate two bungs that can be drilled and tapped for sensors so you can easily monitor your L5P's performance.The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products this kit includes our Mishimoto Lifetime Warranty.
Specifications
| WIDTH | 12.32 |
|---|---|
| HEIGHT | 12.32 |
| LENGTH | 12.32 |
| PROP65 | Y |
| WEIGHT | 8.55 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | EPA Eligible |
| ATTRIBUTES | Clamp Type:T-Bolt;Hot Side Pipe Inside Diameter:0 IN;Cold Side Pipe Inside Diameter:0 IN;Clamps Included:Yes;Finish:Polished;Pipe Material:Aluminum;Pipe Color:Polished;Clamp Quantity:10;Coupler Color:Black;Coupler Material:Silicone;Pipe Quantity:4;Pipe Bend Type:Mandrel;Install Difficulty:3;OptionLabel:Polished;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P;SellingPoint02:3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends;SellingPoint03:Up to 55-percent less restrictive than stock piping;SellingPoint04:Includes new quick-disconnect O-ring and spring clip;SellingPoint05:Hot-side eliminates stock resonator for maximum flow;SellingPoint06:Eliminates failure-prone stock throttle valve connector;SellingPoint07:Retains temp sensor harness mount for safe and secure wire routing;SellingPoint08:Internal bead roll ensures secure connection between coupler and throttle valve;SellingPoint09:CNC-machined quick-disconnect ensures precise leak-free fit;SellingPoint10:Additional bungs can be drilled and tapped for sensors;SellingPoint11:Requires no additional tuning;SellingPoint12:Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps;SellingPoint13:Available in polished or wrinkle-black powder coated finish;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P--2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P----2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P--2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P;TechSpec Centerline Radius:N/A;TechSpec Chassis Codes:N/A;TechSpec Core Height (in):6;TechSpec Core Length (in):22;TechSpec Core Thickness (in):N/A;TechSpec Core Type:N/A;TechSpec Engine Codes:N/A;TechSpec Includes:(3) Aluminum Intercooler Pipes--(1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip--(5) Silicone Boots with DuraCore Technology--(10) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty;TechSpec Inlet (in):N/A;TechSpec Installation Notes:27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).;TechSpec Maximum Recommended Boost Pressure (PSI):N/A;TechSpec Maximum Recommended Horsepower:N/A;TechSpec Note:N/A;TechSpec Outlet (in):N/A;TechSpec Overall Height (in):N/A;TechSpec Overall Length (in):N/A;TechSpec Overall Width (in):N/A;TechSpec Pipe Diameter:N/A;TechSpec Pipe Length:N/A;TechSpec Pipe Shape:N/A;TechSpec Weight (lbs):N/A |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Intercooler Pipe Set |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS |
Datasheet — not yet published