Skip to content

cooling

Mishimoto MMICP-F2D-99KWBK Intercooler Pipe Kit, Black, fits Ford 7.3L Powerstroke 1999-2003

$422

Made to order

Add your car with the “Your car” button in the header to check fitment.

Qty
1

Free freight ≥ $999 · $40 flat below

About this part

Give your Ford Super Duty the durability boost it deserves with the Mishimoto Intercooler Pipe and Boot Kit for the 1999-2003 Ford F-Series 7.3L Powerstroke. These workhorse turbodiesels produce mounds of boost pressure to churn out the serious torque that you need. This abuse takes its toll on the intercooling system especially the piping. The Mishimoto pipe and boot kit replaces the stock system with a pair of tough mandrel-bent aluminum pipes for both the intercooler's hot and cold sides for maximum durability. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone DuraCore provides superior resistance to heat pressure fuel and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power to add even more reliability. For the best performance make sure to pair this kit with our Mishimoto Ford 7.3l Powerstroke Performance Intercooler. The Mishimoto Intercooler Pipe and Boot kit for the Ford F-Series 7.3L Powerstroke is available in a polished and wrinkle-black powder-coated finish and includes the Mishimoto Lifetime Warranty for a worry-free installation.

Specifications

Specifications for Mishimoto MMICP-F2D-99KWBK Intercooler Pipe Kit, Black, fits Ford 7.3L Powerstroke 1999-2003
WIDTH18.27
HEIGHT18.27
LENGTH18.27
PROP65Y
WEIGHT9.25
WARRANTYLifetime Warranty
EMISSIONSEPA Eligible
ATTRIBUTESClamp Type:T-Bolt;Hot Side Pipe Inside Diameter:0 IN;Cold Side Pipe Inside Diameter:0 IN;Clamps Included:Yes;Finish:Powder Coated;Pipe Material:Aluminum;Pipe Color:Black;Clamp Quantity:8;Coupler Color:Black;Coupler Material:Silicone;Pipe Quantity:2;Pipe Bend Type:Mandrel;Install Difficulty:3;OptionLabel:Wrinkle-Black;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 7.3L Powerstroke 1999-2003;SellingPoint02:Mandrel-bent polished aluminum pipes for maximum durability;SellingPoint03:Includes Mishimoto Silicone Boots with DuraCore Technology and Mishimoto Constant Tension T-bolt Clamps;SellingPoint04:Installs in under one hour;SellingPoint05:Available in a polished or wrinkle-black finish;SellingPoint06:Mishimoto Lifetime Warranty;SellingPoint07:N/A;SellingPoint08:N/A;SellingPoint09:N/A;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:1999-2003 Ford F-250 Super Duty--1999-2003 Ford F-350 Super Duty--1999-2003 Ford F-450 Super Duty--1999-2003 Ford F-550 Super Duty--2000-2003 Ford Excursion;TechSpec Centerline Radius:N/A;TechSpec Chassis Codes:N/A;TechSpec Core Height (in):N/A;TechSpec Core Length (in):N/A;TechSpec Core Thickness (in):N/A;TechSpec Core Type:N/A;TechSpec Engine Codes:N/A;TechSpec Includes:(2) Intercooler Pipes--(4) Silicone Boots with DuraCore Technology--(8) Constant-Tension T-Bolt Clamps--Mishimoto Lifetime Warranty;TechSpec Inlet (in):N/A;TechSpec Installation Notes:27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).;TechSpec Maximum Recommended Boost Pressure (PSI):N/A;TechSpec Maximum Recommended Horsepower:N/A;TechSpec Note:N/A;TechSpec Outlet (in):N/A;TechSpec Overall Height (in):N/A;TechSpec Overall Length (in):N/A;TechSpec Overall Width (in):N/A;TechSpec Pipe Diameter:N/A;TechSpec Pipe Length:N/A;TechSpec Pipe Shape:N/A;TechSpec Weight (lbs):N/A
PCDB CATEGORYBelts and Cooling
COUNTRY OF ORIGINCN
PART TERMINOLOGYIntercooler Pipe Set
VEHICLE SPECIFIC FITMENTY
INSTALLATION INSTRUCTIONS

Datasheet — not yet published