cooling
Mishimoto MMICP-FOST-13HWBK Intercooler Pipe Kit, Black, Hot-side, fits Ford Focus ST 2013-2018
$230
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto hot-side intercooler pipe. The stock hot-side pipe in your Focus ST is plagued with bends a restrictive inner diameter and muffling equipment which slows the airflow and causes turbulence on the way to the intercooler. Mishimoto's hot-side intercooler kit not only reduces the amount of bends but also increased the diameter to 2.5? giving it a 14-percent increase in volume over the stock piping meaning better flow and the added bonus of 8hp and 10ft/lbs of torque.While a majority of the stock piping is constructed from aluminum already the couplers are made from degradation-prone rubber. Our kit includes more durable silicone couplers featuring 5-layers of heat-resistant fibers and wire reinforcement to ensure that the Mishimoto hot-side intercooler pipe can stand up to the heat. This kit is offered in a polished finish as well as a wrinkle black powder coat and is covered under Mishimoto's Lifetime Warranty.
Specifications
| WIDTH | 12.15 |
|---|---|
| HEIGHT | 12.15 |
| LENGTH | 12.15 |
| PROP65 | Y |
| WEIGHT | 3.99 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | CARB Eligible |
| ATTRIBUTES | Clamp Type:Worm Gear;Hot Side Pipe Inside Diameter:2 IN;Cold Side Pipe Inside Diameter:2 IN;Clamps Included:Yes;Finish:Powder Coated;Pipe Material:Aluminum;Pipe Color:Black;Clamp Quantity:4;Coupler Color:Black;Coupler Material:Silicone;Pipe Quantity:1;Pipe Bend Type:Mandrel;CARB EO Number:D-759-6;Install Difficulty:3;OptionLabel:Wrinkle Black;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 2013-2018 Ford Focus ST;SellingPoint02:26-percent greater flow than stock hot-side pipe;SellingPoint03:14-percent increase in volume over stock hot-side pipe;SellingPoint04:2.5-in Mandrel-bent aluminum piping;SellingPoint05:Includes Mishimoto silicone couplers and Mishimoto high-torque worm gear clamps;SellingPoint06:Available in polished or wrinkle black powder-coating;SellingPoint07:Mishimoto Lifetime Warranty;SellingPoint08:N/A;SellingPoint09:N/A;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:Ford Focus ST 2013-2018;TechSpec Centerline Radius:N/A;TechSpec Chassis Codes:N/A;TechSpec Core Height (in):N/A;TechSpec Core Length (in):N/A;TechSpec Core Thickness (in):N/A;TechSpec Core Type:N/A;TechSpec Engine Codes:N/A;TechSpec Includes:(1) Aluminum Intercooler Pipe--(2) Silicone Couplers--(4) High-Torque Worm Gear Clamps--Mishimoto Lifetime Warranty;TechSpec Inlet (in):2;TechSpec Installation Notes:27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).;TechSpec Maximum Recommended Boost Pressure (PSI):N/A;TechSpec Maximum Recommended Horsepower:N/A;TechSpec Note:N/A;TechSpec Outlet (in):2.5;TechSpec Overall Height (in):N/A;TechSpec Overall Length (in):N/A;TechSpec Overall Width (in):N/A;TechSpec Pipe Diameter:N/A;TechSpec Pipe Length:N/A;TechSpec Pipe Shape:N/A;TechSpec Weight (lbs):N/A |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Intercooler Pipe Set |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS |
Datasheet — not yet published