wheels and tires
Mishimoto MMLG-M14-24LSL Steel Locking Lug Nuts M14x1.5, Silver, 24pc Set
$146
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Lock down your wheels with confidence. The Mishimoto Steel Locking Lug Nut 24-piece Kit features a one-piece design that eliminates the common failure points of two-piece lug nuts. Each lug nut is built from high-strength steel to resist swelling cracking and impact stress over time. This kit includes 16 standard lug nuts and 4 locking nuts secured with a 7-point non-marring locking tool to protect your wheels without damaging the finish. The 19mm hex size fits a wide range of aftermarket wheels and the open-ended design accommodates extended studs. Available in black or silver this kit is backed by the Mishimoto Lifetime Warranty to keep your wheels stylish and secure for the long run.
Specifications
| WIDTH | 9.5 |
|---|---|
| HEIGHT | 3 |
| LENGTH | 11 |
| PROP65 | Y |
| WEIGHT | 5 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| PCDB CATEGORY | Tire and Wheel |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Wheel Lug Nut |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Mishimoto Automotive/lug nut note card alt.PDF |
| MATERIAL | Steel |
| THREAD DIRECTION | Clockwise (Right) |
| THREAD TYPE STANDARD | Metric |
| COLOR | Silver |
| SHANK LENGTH | 50 MM |
| GRADE TYPE | Performance |
| HEX SIZE | 19mm |
| SEAT TYPE | Conical |
| SAE OR METRIC | Metric |
| THREAD SIZE | M14 - 1.5 |
| WHEEL LOCK KEY INCLUDED | Yes |
| SHANK DIAMETER | 19 MM |
| INSTALL DIFFICULTY | 1 |
| OPTION LABEL | Silver |
| PROP 65 SHORT LABEL | WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| PROP 65 Y/N | Y |
| SELLING POINT01 | 24-piece kit fits vehicles equipped with M14x1.5 wheel studs |
| SELLING POINT02 | One-piece construction resists swelling and cracking unlike failure-prone two-piece OEM design |
| SELLING POINT03 | Manufactured from high-strength steel for long-lasting durability and high tensile load resistance |
| SELLING POINT04 | Includes discreet 7-point locking nuts and non-marring tool to prevent wheel theft without damaging wheel finishes |
| SELLING POINT05 | Available in black or silver for a clean upgraded look over stock |
| SELLING POINT06 | Open-ended design allows for use with extended wheel studs |
| SELLING POINT07 | Mishimoto Lifetime Warranty |
| SELLING POINT08 | N/A |
| SELLING POINT09 | N/A |
| SELLING POINT10 | N/A |
| SELLING POINT11 | N/A |
| SELLING POINT12 | N/A |
| SELLING POINT13 | N/A |
| SELLING POINT14 | N/A |
| SELLING POINT15 | N/A |
| TECH SPEC APPLICATIONS | N/A |
| TECH SPEC DIAMETER (INCHES) | 0.94 |
| TECH SPEC ENGINE CODES | N/A |
| TECH SPEC INCLUDES | (16) M14x1.5 Steel Lug Nuts-- (4) Locking Lug Nuts--(2) Non-Marring Sockets--Mishimoto Lifetime Warranty |
| TECH SPEC INSTALLATION NOTES | Refer to your vehicles recommended torque specs |
| TECH SPEC LENGTH (INCHES) | N/A |
| TECH SPEC MATERIAL | SCM435 Steel |
| TECH SPEC MAXIMUM PRESSURE (PSI) | N/A |
| TECH SPEC MAXIMUM TEMPERATURE (F) | N/A |
| TECH SPEC MINIMUM YIELD STRENGTH | N/A |
| TECH SPEC NOTE | Finishes may fade when abrasive or corrosive cleaners are used. In addition the use of power tools may also damage the finish. Mishimoto Automotive will not warrant nuts for fading finishes or damage occurring from use of tools. |
| TECH SPEC OVERALL HEIGHT (INCHES) | 2 |
| TECH SPEC THREAD SIZE | M14X1.5 |
| TECH SPEC ULTIMATE TENSILE STRENGTH | N/A |
| TECH SPEC WEIGHT (OUNCES) | 2.33 |
| VERIFIED FITMENT |
|
Datasheet — not yet published