cooling
Mishimoto MMOC-MUS8-18TBKRHD Oil Cooler Kit, Black, Thermostatic, fits Ford Mustang GT RHD 2018-2023
$900
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Add some extra cooling power to your 2018-2023 Mustang GT with the Mishimoto Oil Cooler Kit. In 2018-2023 Ford evolved their staple muscle car with a fresh and even more futuristic look on the S550. As the Mustang evolved we evolved along with it to provide optimal cooling for your modern Mustang. Our engineers started with designing a heat exchanger from the ground up to provide the largest oil cooler we have to offer and mounted directly to the front of the vehicle for optimal airflow. From there we also developed an application specific mounting bracket that also serves as a diversion panel to further improve the airflow through the cooler. Our kit also includes a set of direct fit stainless-steel braided lines for a secure conduit to and from the cooler completed with -10AN fittings for a simplified installation. Finally the Mishimoto 2018-2023 Ford Mustang GT Oil Cooler Kit includes our trusted thermostatic oil sandwich plate to protect against the overcooling of your engine oil. Our kit is available with the option of a silver or black cooler and is protected under the Mishimoto Lifetime Warranty for a worry-free installation. The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2018-2023 Mustang GT (LHD) oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2018-2023 Mustang parts the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.
Specifications
| WIDTH | 14.45 |
|---|---|
| HEIGHT | 14.45 |
| LENGTH | 14.45 |
| PROP65 | Y |
| WEIGHT | 24.62 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Inlet Outside Diameter:0 IN;Outlet Outside Diameter:0 IN;Base Height:2.5 IN;Color:Black;Finish:Anodized;Width:12.3 IN;Core Height:0 IN;Core Thickness:0 IN;Core Width:18.5 IN;Grade Type:Performance;Core Type:Bar-and-Plate;Inlet Fitting Gender:Male;Outlet Fitting Gender:Male;Core Row Quantity:0;Fluid Capacity:1 GA;Core Color:Black;Inlet Fitting Type:AN Flare;Outlet Fitting Type:AN Flare;Cooler Fluid Capacity:1 QT;Install Difficulty:4;OptionLabel:Black Thermostatic;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 2018-2023 Ford Mustang GT RHD;SellingPoint02:Innovative bar-and-plate oil cooler mounts in the upper grille allowing more room for supercharger heat exchangers;SellingPoint03:Mounting bracket also serves as an air diversion panel directing the maximum amount of ambient air through the oil cooler;SellingPoint04:Pre-made stainless steel braided oil lines with durable -AN fittings;SellingPoint05:Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler;SellingPoint06:Removes the stock fluid-based oil cooler for less stress on the engine's cooling system;SellingPoint07:Billet aluminum thermostatic oil sandwich plate;SellingPoint08:Increases oil capacity by 1qt;SellingPoint09:Fits with most aftermarket supercharger kits;SellingPoint10:Mishimoto Lifetime Warranty;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:2018-2023 Ford Mustang GT (Right Hand Drive vehicles only);TechSpec Caution:It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation.;TechSpec Chassis Codes:S-550;TechSpec Core Construction:N/A;TechSpec Core Height (in):N/A;TechSpec Core Length (in):18.5;TechSpec Core Thickness (in):N/A;TechSpec Engine Codes:5.0 Coyote III;TechSpec Includes:Application Specific Mounting Bracket / Air Diversion Shield--Bar and Plate Oil Cooler--2ft 3in Stainless Steel Braided Hose w/ -10AN Fittings--4ft 8in Stainless Steel Braided Hose w/ -10AN Fittings--M22 Thermostatic Sandwich Plate--Application - Specific M22 x 1.5 extended length center bolt--M20 x -10AN Straight Fittings--1/8-in NPT Plugs--Large O-ring--Lower Radiator Hose w/ worm gear clamps--Mounting Hardware Set--Mishimoto Lifetime Warranty;TechSpec Inlet:N/A;TechSpec Installation Notes:N/A;TechSpec Note:Requires the removal of the stock coolant based oil cooler.----Installation requires the removal of the active grill shutters. Removal without tuning can cause a check engine light.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb;TechSpec Outlet:N/A;TechSpec Overall Height (in):2.5;TechSpec Overall Length (in):28.6;TechSpec Overall Width (in):12.3;TechSpec Rows:12 |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Oil Cooler |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | https://sdda.semadata.org/Standard/Mishimoto Automotive/MMOC-MUS8-18T_INSTALLATIONGUIDE.pdf |
| VERIFIED FITMENT |
|
Datasheet — not yet published