cooling
Mishimoto MMOC-WRA-07T Oil Cooler Kit, Silver, Thermostatic, fits Jeep Wrangler JK 2007-2011
$543
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Your high-performance JK demands Jeep performance parts and a cooling solution that can keep up in the most extreme environments. Whether you are cruising through the dunes or hitting the trails properly regulated oil temperatures are vital to the life of your engine. Excessive temperatures result in rapid oil degradation and can put a quick end to a fun day in your rig. Mishimoto has the perfect solution for controlling oil temperatures – the Jeep JK direct-fit oil cooler kit. This kit utilizes precision-engineered JK-specific mounting brackets pre-made stainless steel lines oil filter sandwich plate and all hardware necessary for a quick and easy installation. The Mishimoto Jeep Wrangler JK Oil Cooler Kit adds .75 qt to your oil capacity and reduces temperatures by up to 40° F while maintaining minimal pressure drop. This kit is a perfect complement to the Mishimoto Jeep JK Transmission Cooler Kit and the Mishimoto Performance Aluminum Jeep Wrangler Radiator for the ultimate cooling solution for your Jeep JK. This oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermosta for additional oil temperature control. As with all our Jeep Wrangler parts this kit includes the Mishimoto Lifetime Warranty----Please note: Mishimoto fully inspects and cleans all products prior to packaging. However it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions.
Specifications
| WIDTH | 10.98 |
|---|---|
| HEIGHT | 10.98 |
| LENGTH | 10.98 |
| PROP65 | Y |
| WEIGHT | 9.82 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Inlet Outside Diameter:0 IN;Outlet Outside Diameter:0 IN;Base Height:0 IN;Color:Silver;Finish:Anodized;Width:0 IN;Core Height:5.43 IN;Core Thickness:1.97 IN;Core Width:11 IN;Grade Type:Performance;Core Type:Bar-and-Plate;Inlet Fitting Gender:Male;Outlet Fitting Gender:Male;Core Row Quantity:0;Fluid Capacity:0 GA;Core Color:Silver;Inlet Fitting Type:AN Flare;Outlet Fitting Type:AN Flare;Install Difficulty:3;OptionLabel:Silver Cooler Thermostatic;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 2007-2011 Jeep Wrangler JK;SellingPoint02:Application-specific mounting brackets;SellingPoint03:Premade braided stainless steel oil lines with durable -AN fittings;SellingPoint04:Billet aluminum oil sandwich plate in standard or thermostatic form;SellingPoint05:19-row stacked-plate oil cooler for optimal fluid temperature reduction;SellingPoint06:Reduces oil temperatures by up to 40-degrees;SellingPoint07:Compatible with all Mishimoto JK Wrangler parts;SellingPoint08:Increases oil capacity by 0.75 qt;SellingPoint09:Mishimoto Lifetime Warranty;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:2007-2011 Jeep Wrangler--2007-2011 Jeep Wrangler Unlimited;TechSpec Caution:It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation. For additional technical information contact our customer experience team.;TechSpec Chassis Codes:JK;TechSpec Core Construction:N/A;TechSpec Core Height (in):5.43;TechSpec Core Length (in):11;TechSpec Core Thickness (in):1.97;TechSpec Engine Codes:EGH;TechSpec Fluid Capacity (qts):N/A;TechSpec Includes:Application Specific Mounting Brackets--19-Row Oil Cooler--2-ft 8-in Stainless Steel Braided Hose w/ -10AN Fittings--M20 Sandwich Plate--Stainless Steel Sandwich Plate Adapter 3/4-in -16--Banjo Fitting w/ Bolt M20 x -10AN Black--1/8-in NPT Plugs--Large O-ring--Mounting Hardware Set--Mishimoto Lifetime Warranty;TechSpec Inlet:N/A;TechSpec Installation Notes:Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb;TechSpec Note:This kit comes with MMOP-SPTR our sandwich plate with rear-mounted thermostat. Mishimoto does not recommend using MMOP-SPT due to suspension clearance issues.----Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb----It is the installer's responsibility to check all thermostat plugs NPT plugs line fittings and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals especially during the first few miles after installation. For additional technical information contact our customer experience team.;TechSpec Outlet:N/A;TechSpec Overall Height (in):N/A;TechSpec Overall Length (in):N/A;TechSpec Overall Width (in):N/A;TechSpec Rows:19 |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Oil Cooler |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published