cooling
Mishimoto MMRT-E36-92E Aluminum Coolant Expansion Tank, Polished, fits BMW E36 1992-1999
$191
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Add some additional reliability and engine bay styling with the Mishimoto BMW E36 Aluminum Coolant Expansion Tank. Stock coolant expansion tanks are prone to failure after years of constant temperature variations. The Mishimoto tank is constructed from durable TIG-welded aluminum for optimal durability and longevity. The engineers at Mishimoto have designed a CNC-machined dipstick which doubles as a bleeder and allows for proper cold coolant levels. It features a polished finish that will look great in your engine bay. This expansion tank is a direct fit for the stock and Mishimoto BMW E36 Performance Fan Shroud Kit! As with all our products this expansion tank includes the Mishimoto Lifetime Warranty.
Specifications
| WIDTH | 10 |
|---|---|
| HEIGHT | 10.7 |
| LENGTH | 15.5 |
| PROP65 | Y |
| WEIGHT | 4.52 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Install Difficulty:N/A;OptionLabel:Silver;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 1992-1999 BMW E36;SellingPoint02:Dipstick allows for proper coolant levels;SellingPoint03:All-aluminum fully-welded construction for maximum durability during repeated cold and hot transitions;SellingPoint04:Installs in under 1 hour;SellingPoint05:Included Mishimoto High-Pressure 1.3 Bar Radiator Cap raises the boiling point of engine coolant to provide a safer and more efficient system;SellingPoint06:Fits stock and Mishimoto BMW E36 Performance Fan Shroud Kit;SellingPoint07:Available in polished or anodized black;SellingPoint08:Mishimoto Lifetime Warranty;SellingPoint09:N/A;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:1992-95 BMW 325i/ic/is--1995-99 BMW M3--1996-1998 BMW 328i/ic/is--1998-99 BMW 323ic/is;TechSpec Chassis Codes:E36;TechSpec Engine Codes:S52 M52 M50TU M20B25;TechSpec Fluid Capacity (gal):N/A;TechSpec Height (in):N/A;TechSpec Includes:(1) Aluminum Expansion Tank--(1) CNC-Machined Dipstick--(1) Mishimoto Radiator Cap--(1) Overflow Hose--(1) Worm-Gear Clamp--Mishimoto Lifetime Warranty;TechSpec Installation Notes:22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).;TechSpec Material:6061 Aluminum;TechSpec Note:After a few hot and cold cycles Mishimoto recommends checking the dipstick to confirm a proper cold coolant level. It is critical that the dipstick is not removed when the engine coolant is hot. You must wait until the coolant is cold before removing.----THIS WILL NOT FIT MODELS WITH 4-CYLINDER ENGINES.;TechSpec Width (in):N/A |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Coolant Reservoir |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published