cooling
Mishimoto MMRT-F2D-99EMWBK Aluminum Degas Tank, Black, fits Ford 7.3L Powerstroke 1999-2003
$348
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
It's been over a decade since the last 1999-2003 7.3L Powerstroke rolled off the assembly line. A lot can happen to a vehicle in that much time. And if you're like many 7.3L Powerstroke owners you've been through more than one degas tank. Over time the stock plastic tank becomes brittle and cloudy making it prone to breaking and impossible to see the coolant level. Luckily Mishimoto has a solution that will look and function in 15 years just as well as it does today. Replace your ugly and brittle plastic stock tank with Mishimoto's all-aluminum 1999-2003 7.3L Powerstroke degas tank. The fully-welded design of Mishimoto's degas tank means that it won't crack and leak coolant and the integrated sight glass makes checking the coolant level easy. No more trying to shine a flashlight through a muddy tank. For even more convenience the Mishimoto degas tank includes an additional 1/8in NPT port for easy pressure monitoring. Of course this degas tank is also backed by Mishimoto's Lifetime Warranty. In the unlikely event you have an issue Mishimoto has you and your 1999-2003 Ford 7.3L Powerstroke covered.
Specifications
| WIDTH | 7.3 |
|---|---|
| HEIGHT | 17.6 |
| LENGTH | 20.3 |
| PROP65 | Y |
| WEIGHT | 10.45 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Install Difficulty:2;OptionLabel:Micro-Wrinkle Black;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for 1999-2003 Ford 7.3L Powerstroke;SellingPoint02:Full-aluminum construction with durable TIG-welds;SellingPoint03:43-percent increase in coolant capacity over stock degas tank;SellingPoint04:Sight glass allows for quick and easy reading of coolant level;SellingPoint05:Additional 1/8-in NPT port for easy sensor installation;SellingPoint06:Available natural finish makes customization easy through powder-coating anodizing or hydro-dipping;SellingPoint07:Fits with stock cap;SellingPoint08:Available in natural or micro-wrinkle black powdercoated finish;SellingPoint09:Mishimoto Lifetime Warranty;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:Ford Excursion V8 (5.4L) 1999-2005--Ford Excursion V10 (6.8L) 1999-2005--Ford Excursion V8 (7.3L) 1999-2003--Ford F-250 Super Duty V8 (5.4L) 1999-2004--Ford F-250 Super Duty V10 (6.8L) 1999-2004--Ford F-250 Super Duty V8 (7.3L) 1999-2003--Ford F-350 Super Duty V8 (5.4L) 1999-2004--Ford F-350 Super Duty V10 (6.8L) 1999-2004--Ford F-350 Super Duty V8 (7.3L) 1999-2003--Ford F-450 Super Duty V10 (6.8L) 1999-2004--Ford F-450 Super Duty V8 (7.3L) 1999-2004--Ford F-550 Super Duty V10 (6.8L) 1999-2004--Ford F-550 Super Duty V8 (7.3L) 1999-2004;TechSpec Chassis Codes:N/A;TechSpec Engine Codes:N/A;TechSpec Fluid Capacity (gal):0.72;TechSpec Height (in):N/A;TechSpec Includes:(1) Aluminum Expansion Tank w/ Sight Glass--(1) Pre-installed 1/8-in NPT plug--Mishimoto Lifetime Warranty;TechSpec Installation Notes:N/A;TechSpec Material:6061 Aluminum;TechSpec Note:Mishimoto does not provide powder-coating anodizing or hydro-dipping services for this product. Customers who purchase the natural finish must source these services independently.----The natural finish may show some surface imperfections that will not affect powder-coating or other customization.----After a few heat cycles Mishimoto recommends checking the sight glass on the side of the degas tank to confirm proper coolant level.;TechSpec Width (in):N/A |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Coolant Reservoir |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS |
Datasheet — not yet published