cooling
Mishimoto MMRT-MOP-11EMWBK Aluminum Expansion Tank, Black, fits Dodge Charger/Challenger 2011-2023
$405
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Dodge and Chrysler have put a lot of work into the exteriors of their vehicles especially in recent years. With the positively mean look these cars have one would expect an equally clean look under the hood of the 2011-2023 Dodge Charger Challenger and Chrysler 300C. For the most part it all adds up except for the factory expansion tank. Sticking out like a sore thumb the dull yellow reservoir for your Mopar's coolant diminishes the inWowin factor under the hood. On top of that these plastic bits are notorious for degrading and leaking over time. We here at Mishimoto are determined to inject some style into the engine bay of your Mopar with the Mishimoto 2011-2023 Dodge Charger/Challenger Chrysler 300C Aluminum Expansion Tank. We've eliminated the angry beige plastic look of the stock tank with TIG-welded aluminum exponentially improving on the expansion tank's aesthetics and durability. We've also ditched the need for a sight glass or tube by incorporating a cold-fill line within the internal baffling keeping the sleek exterior design of our tank untouched. The Mishimoto 2011-2023 Dodge Charger/Challenger Chrysler 300C Aluminum Expansion Tank is available in a micro-wrinkle black or a natural finish for easy color matching customization through powder-coating or hydro-dipping. Our expansion tank includes the Mishimoto Lifetime Warranty which ensures you'll never have to see the eyesore that is the stock expansion tank ever again.
Specifications
| WIDTH | 14 |
|---|---|
| HEIGHT | 9.7 |
| LENGTH | 16 |
| PROP65 | Y |
| WEIGHT | 7.9 |
| WARRANTY | Lifetime Warranty |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Install Difficulty:2;OptionLabel:Micro-Wrinkle Black;Prop 65 - Short Label:WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov;Prop 65 Y/N:Y;SellingPoint01:Direct fit for the 2011-2023 Dodge Charger Challenger and Chrysler 300C (See Fitment List);SellingPoint02:100-percent aluminum fully welded construction for maximum durability during repeated temperature transitions;SellingPoint03:Cold fill tab incorporated into internal baffling to retain sleek exterior design;SellingPoint04:Available natural finish makes customization easy through powder coating anodizing or hydro dipping;SellingPoint05:Internal baffles keep coolant near overflow port during aggressive driving preventing air entry into coolant system;SellingPoint06:Fits with stock expansion tank cap;SellingPoint07:Available in a micro-wrinkle black powder coating or natural finish;SellingPoint08:Mishimoto Lifetime Warranty;SellingPoint09:N/A;SellingPoint10:N/A;SellingPoint11:N/A;SellingPoint12:N/A;SellingPoint13:N/A;SellingPoint14:N/A;SellingPoint15:N/A;TechSpec Applications:2011-2023 Chrysler 300C 3.6L/5.7L/6.4L--2011-2014 Dodge Charger/Challenger 3.6L/5.7L/6.4L--2015+ Dodge Charger/Challenger 3.6L/5.7L;TechSpec Chassis Codes:N/A;TechSpec Engine Codes:N/A;TechSpec Fluid Capacity (gal):N/A;TechSpec Height (in):N/A;TechSpec Includes:(1) Aluminum Expansion Tank--Mishimoto Lifetime Warranty;TechSpec Installation Notes:22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).;TechSpec Material:6061 Aluminum;TechSpec Note:Mishimoto does not provide powder coating anodizing or hydro dipping services for this product. Customers who purchase the natural finish must source these services independently.----The natural finish may show some surface imperfections that will not affect powder coating or other customization.;TechSpec Width (in):N/A |
| PCDB CATEGORY | Belts and Cooling |
| COUNTRY OF ORIGIN | CN |
| PART TERMINOLOGY | Engine Coolant Reservoir |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published