clutch and drivetrain
Skyjacker - FIXED YOKE KIT/NP231 - RR231
$420
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
There is a lot that goes into lifting a truck or SUV the right way. For certain vehicles this involves correcting the angle of the drive shaft. When the front end is raised the transfer case goes with it. Unfortunately this lifts the drive shaft to a steep angle causing annoying vibration throughout the vehicle. Plus stress on the slip yoke can cause the rear shaft to snap. Skyjackers Slip Yoke Eliminator Kit solves the problem with a fixed yoke 32-spline output shaft that can stand-up to off-road and on-road rigors. It also increases drive shaft length by 4.5 inches stopping vibration and stress.
Specifications
| WIDTH | 7 |
|---|---|
| HEIGHT | 6 |
| LENGTH | 20 |
| PROP65 | Yes |
| WEIGHT | 15.3 |
| WARRANTY | |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Prop 65 - Short Label:California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov);Prop 65 Yes/No:Yes |
| PCDB CATEGORY | Transfer Case |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Transfer Case Slip Yoke Eliminator Kit |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published