suspension and steering
Skyjacker - SOFTRIDE SPRG 4IN. REAR 89 TOY - TR49S
$262
Made to order
Add your car with the “Your car” button in the header to check fitment.
Free freight ≥ $999 · $40 flat below
About this part
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Specifications
| WIDTH | 11 |
|---|---|
| HEIGHT | 2.25 |
| LENGTH | 49 |
| PROP65 | Yes |
| WEIGHT | 35 |
| WARRANTY | |
| EMISSIONS | Emissions Compliance Exempt |
| ATTRIBUTES | Lift/Drop Height:4 in.;Prop 65 - Short Label:California Residents- WARNING: Cancer and-or other Reproductive Harm. (For more information go to www.p65warnings.ca.gov);Prop 65 Yes/No:Yes |
| PCDB CATEGORY | Suspension |
| COUNTRY OF ORIGIN | US |
| PART TERMINOLOGY | Leaf Spring Assembly |
| VEHICLE SPECIFIC FITMENT | Y |
| INSTALLATION INSTRUCTIONS | |
| VERIFIED FITMENT |
|
Datasheet — not yet published